Home | Presses | Intro | Site Map | P.R. | Chemicals | Answers | |
Prices | Specials | How To | Bullets | B.Makers | Books | Classified | |
Topics | Jackets | Terms | Training | Software | Products | Contact us |
|
|
||||||||||||||||||||||||||||||||||||
|
These are the recomended standard ejection sizes for each caliber range. Larger ejection pins can be used on special order, but smaller ones may bend, penetrate the bullet core, and fail to eject so they are neither recomended nor warrantied, but can be made as custom die orders with the understanding that if they do not work, they are not returnable. (To make smaller open tips, use a tip closing punch in the LT-1 lead tip die to reduce the opening, or use an FX-1 two-part bullet swage die with blind cavity instead of a standard point forming die.)
Note: Ejection pin sizes are given to nearest .001 inch. A .071 or .072 ejection pin is within the tolerance of standard spring wire sizes and either can be used interchangeably, for instance. A die marked .091 will accept an ejection pin marked ".092". | ||||||||||||||||||||||||||||||||||||
Corbin Manufacturing & Supply, Inc.
White City, OR 97503 USA Phone 9am-5pm Mon-Thurs: 541-826-5211 Fax 24-hrs: 541-826-8669 Website: http://www.swage.com E-mail: sales@corbins.com |
Home Page | Price List | E-Mail Sales | Site Map | New Products | Q&A | Terminology |
Retirement | Specials | Real Estate | Software | How to swage | Classified Ads | Feedback |